|
Description |
Price (USD)
|
Availability
|
|
ProClip USA
ProClip 6-Pin Molex Male to Male
Power Cable (70 cm/2.5 feet) with 6 Pin Male Molex Connectors for use between the sliding power block and Voltage Conversion Box
SKU: PRO-IP810 Mfgr Part#: IP810
|
|
|
ProClip USA
PEDESTAL HEAD 45DEG ANGLE
45 degree Angled Top part to mount a device holder onto. Fits all ProClip pedestals. The top has four holes for mounting onto the top part of a Pedestal Mount. It has dual AMPS-holes for mounting of holder for unit.
SKU: PRO-215570 Mfgr Part#: 215570
|
|
|
ProClip USA
Backer Plate - ABS with 5mm Holes
PEDESTAL MOUNT BACK PLATE WITH 5MM THREADED HOLES
SKU: PRO-215798 Mfgr Part#: 215798
|
|
|
ProClip USA
Cable Retention Add-On w Retentn Screw
Cable Retention Add-On with Retention Screw
SKU: PRO-241711 Mfgr Part#: 241711
|
|
|
ProClip USA
Cable Retention Add-On with Retention Cl
Cable Retention Add-On with Retention Clip
SKU: PRO-241723 Mfgr Part#: 241723
|
|
|
ProClip USA
Pedestal Mount 4 inch, Lite-Duty
Pedestal Mount 4 inch, Lite-Duty, Adjustable
SKU: PRO-100400 Mfgr Part#: 100400
|
|
|
ProClip USA
Angled Top Part - 60 Degrees
Angled Top Part - 60 Degrees Angles the top part of the Pedestal Fits both Solid Core and Hollow Core Pedestals Dual AMPS-hole patterns for mounting of a device holder
SKU: PRO-215571 Mfgr Part#: 215571
|
|
|
ProClip USA
VESA Adapter Plate with Tilt-Swivel
VESA Adapter Plate with Tilt-Swivel
SKU: PRO-240902 Mfgr Part#: 240902
|
|
|
ProClip USA
VESA 75-100 to M4 AMPS Adapter Plate
The VESA ProClip adapter plate attaches to any existing 75mm and 100mm VESA mounting system to create a new flat mounting surface to allow the attachment of ProClip specific mounts and other mounts/devices. Attach to 75mm and 100mm existing VESA systems. Made in Sweden from Durable Machined Aluminum. 4 - Pre-drilled 4mm threaded AMPS pattern holes to easily attach ProClip products
SKU: PRO-215987 Mfgr Part#: 215987
|
|
|
ProClip USA
ModTek Hard Case Hand Strap
Hand Strap for ModTek Hard Case Attach Opposite from USB-C Port
SKU: PRO-102807 Mfgr Part#: 102807
|
|
|
ProClip USA
Steel Extension Plate
Steel Extension Plate, 10.24 in (26 cm) x 2.36 in (6 cm) x .12 in (3 mm)
SKU: PRO-216095 Mfgr Part#: 216095
|
|
|
ProClip USA
Proclip Quick Release Dock 40mm Lever
Quick Release Dock, 45 mm QUICK RELEASE, NON-CHARGING
SKU: PRO-241315 Mfgr Part#: 241315
|
|
|
ProClip USA
AMPS Adapter Plate for DTG Power Carts
AMPS Adapter Plate for DTG Power Carts
SKU: PRO-241911 Mfgr Part#: 241911
|
|
|
ProClip USA
Hard-Wired Power Supply Dual USB-A
Hardwire Power Supply with Dual USB Ports. Input 12/24V to 2 Pin Molex Port Output Port 1: 5.25 V, 2.4 A, Output Port 2: Qualcomm quick charge 6V/3A 9V/2A, 12V 1.5A No power cables included
SKU: PRO-945011 Mfgr Part#: 945011
|
|
|
ProClip USA
VESA Adapter Plate Recessed Steel
The VESA ProClip adapter plate attaches to any existing VESA 75mm or 100mm mounting system. Use to create a new recessed mounting surface to allow the attachment of ProClip specific holders. 4 pre-drilled AMPS pattern pilot holes to attach ProClip holders more securely. 5 mm Diameter Holes accommodate up to M5 screws
SKU: PRO-216042 Mfgr Part#: 216042
|
|
|
ProClip USA
Seat Rail Mount Flexible Arm AMPS Plate
Seat Rail Mount - Aluminum Arm with Flexible Top
SKU: PRO-100235 Mfgr Part#: 100235
|
|
|
ProClip USA
Hand Strap for ProClip Products (Long)
Hand Strap for ProClip Products (Long)
SKU: PRO-710882 Mfgr Part#: 710882
|
|
|
ProClip USA
ProClip 2.25" Ball to AMPS Plate
2.25" Ball to AMPS Plate
SKU: PRO-100227 Mfgr Part#: 100227
|
|
|
ProClip USA
ProClip USB-C PD and USB-A Wall Adapter
USB-C/A Wall Charger 18W USB-C Port Featuring Power Delivery 3.0 12W USB-A for Charging
SKU: PRO-100418 Mfgr Part#: 100418
|
|
|
ProClip USA
Heavy Duty Steel Extension Plate
This Extension Plate has pre-drilled holes for the AMPS hole pattern. This allows additional holders to be added to existing mounts. It features up to 5 positions in either portrait or landscape orientation. Additional holes allow for cables to be run through the plate for a clean installation. Extension plate allows an additional device holder to be added. Multiple Locations for AMPS hole pattern mounts. Made from durable steel. 11.8 in (30 cm) x 2.36 in (6 cm) x .12 in (3 mm)
SKU: PRO-216044 Mfgr Part#: 216044
|
|
|
ProClip USA
Short Extension Plate
Short Extension Plate
SKU: PRO-216076 Mfgr Part#: 216076
|
|
|
ProClip USA
MOUNT HEAVYDUTY OFFSET 2IN
Precision machined from solid core aluminum rod, this Heavy-Duty Extension Rod provides the means to lengthen or customize your ProClip Heavy-Duty Mount and includes bolt and wingnut. - The teeth machined into the joints at each end of the rod are specifically compatible with our Heavy-Duty mounts. The interlocking joint design adjusts incrementally by 11.25 degrees. - Compatible with all ProClip Heavy-Duty Mounts - Available in 2, 4, 6 and 8 Inch Lengths
SKU: PRO-215767 Mfgr Part#: 215767
|
|
|
ProClip USA
ProCLip Print Mount Plate Honeywell RP4F
Printer Mount Plate with Battery Access for Honeywell RP4f
SKU: PRO-216231 Mfgr Part#: 216231
|
|
|
ProClip USA
ProClip Wall Power Supply 12V Molex
AC Wall Power Supply with 6-Pin Molex Adapter 110-240V 1.3A AC Input 12V 3A DC Output Interchangeable Wall Plugs 5 Foot Cable
SKU: PRO-216353 Mfgr Part#: 216353
|
|
|
ProClip USA
MEDIUM ADJUSTABLE HOLDER W/ TILT SWIVEL
MEDIUM ADJUSTABLE HOLDER WITH Tilt-Swivel UM-1 Inner Groove width: 6 mm (0.24 inches) Width adjustment: 62 - 77 mm (2.44 - 3.03 inches)
SKU: PRO-246804 Mfgr Part#: 246804
|
|
|
ProClip USA
ProClip Medium Adjustable Phone Holder
MEDIUM ADJUSTABLE HOLDER WITH Tilt-Swivel UM-3 Inner Groove width: 12 mm (0.24 inches) Width adjustment: 62 - 77 mm (2.44 - 3.03 inches)
SKU: PRO-246806 Mfgr Part#: 246806
|
|
|
ProClip USA
Adjustable Phone Holder
Adjustable Phone Holder - Device thickness: 6-10 mm (0.24-0.39 inches) - Width adjustment: 75-89 mm (2.95-3.50 inches). This Large Adjustable Universal Holder is designed to hold devices used without or with a skin or case. You make a one time easy adjustment to have the best fit for your device with or without a case. When you switch cases you can re-adjust the holder for a better fit. Rotate in portrait and landscape view, great for navigation.
SKU: PRO-246827 Mfgr Part#: 246827
|
|
|
ProClip USA
Large Adjustable ProClip Holder T2
Large Adjustable ProClip Holder T2 - Device thickness: 9-13 mm (0.35-0.51 inches) - Device thickness: 9-13 mm (0.35-0.51 inches). This Large Adjustable Universal Holder is designed to hold devices used without or with a skin or case. You make a one time easy adjustment to have the best fit for your device with or without a case. When you switch cases you can re-adjust the holder for a better fit. Rotate in portrait and landscape view, great for navigation.
SKU: PRO-246830 Mfgr Part#: 246830
|
|
|
ProClip USA
Large Adjustable ProClip Holder T3
Large Adjustable ProClip Holder T3 - Device thickness: 12-16 mm (0.47-0.62 inches) - Width adjustment: 75-89 mm (2.95-3.50 inches). This Large Adjustable Universal Holder is designed to hold devices used without or with a skin or case. You make a one time easy adjustment to have the best fit for your device with or without a case. When you switch cases you can re-adjust the holder for a better fit. Rotate in portrait and landscape view, great for navigation.
SKU: PRO-246831 Mfgr Part#: 246831
|
|
|
ProClip USA
ProClip Medium Adjustable Holder
Medium Universal Adjustable ProClip Holder
SKU: PRO-711042 Mfgr Part#: 711042
|
|