|
Description |
Price (USD)
|
Availability
|
|
ProClip USA
ZEBRA ET50/55 8.3 CRADLE
This cradle is custom fit to the Zebra ET5x 8.3 bare tablet - This cradle is machined from ABS and Acetal polymers and features AMPS and 75mm VESA hole patterns for easy attachment to vehicles, work carts or flat surfaces. - Custom fit to bare tablet - Does not angle or rotate; providing a solid mounting platform - Recommended with ProClip mounts and pedestals.
SKU: PRO-510880 Mfgr Part#: 510880
|
|
|
ProClip USA
ET4x - Spring Lock Module, No Boot
Spring Lock Module Zebra ET40/ET45 8" and 10" (Bare Tablet)
SKU: PRO-216313 Mfgr Part#: 216313
|
|
|
ProClip USA
HEAVYDUTY CLAMP MOUNT 3.375 x 5.125
Perfect for use with all types of forklifts. Attach a custom ProClip device holder directly to the face plate or add a ProClip Mount for even more flexibility. - Works perfectly on the roll bar of a forklift - The forklift mount can be mounted on square surfaces - Multiple sets of AMPS holes makes the fitting of a ProClip mount base easy - Comes with complete set of screws in various sizes, allowing for the forklift mount to span from 130mm to 5mm
SKU: PRO-215677 Mfgr Part#: 215677
|
|
|
ProClip USA
USB-C Charge Cradle Honeywell CT30 XP
Charging Cradle - USB-C with Dual-USB Hard-Wired Power Supply Honeywell CT30 XP with Protective Boot
SKU: PRO-727335 Mfgr Part#: 727335
|
|
|
ProClip USA
ET4x Cradle, Hard-Wired, Boot, X-Back
Charging Cradle, Hard-Wired Power Supply Zebra ET40/ET45 8" (with Rugged Boot) Supports Expansion Back
SKU: PRO-713330 Mfgr Part#: 713330
|
|
|
ProClip USA
Hino 200/300 Angled Commercial Platform
Hino 200/300 Angled Mount - Commercial Mounting Platform, strong enough to hold a device in the Tough Sleeve.The mount attaches to the upper center right of the center dash. Device Holder NOT included, sold separately.Comes with a pre-drilled hole pattern for device attachment. A device holder can easily be attached anywhere on the face plate. Compatibel with: Hino 200-Series 2005 - 2020, Hino 300-Series 2005 - 2020
SKU: PRO-213528 Mfgr Part#: 213528
|
|
|
ProClip USA
ET4x Cradle, SL, CLA
Charging Cradle, Spring Lock, Cigarette Lighter Adapter Zebra ET40/ET45 10" (Bare Tablet)
SKU: PRO-746319 Mfgr Part#: 746319
|
|
|
ProClip USA
SWIVEL PEDESTAL 4.5IN 15DEG HEAD
This 4.5 inch Pedestal Mount is very strong yet light weight. The pedestal top swivels 340 degrees. It has a 6 hole base for attaching to any flat surface or one of our Round Mounting Plates for additional strength. Head is angled 15 degrees for easy device viewing
SKU: PRO-215815 Mfgr Part#: 215815
|
|
|
ProClip USA
Steel AMPS Adapt Plate for Zeb VC80/80x
Adapts the VC80, VC80x back hole pattern to industry standard AMPS. Threaded for M4 screws. Recessed for flush mounting
SKU: PRO-100142 Mfgr Part#: 100142
|
|
|
ProClip USA
Dual Port USB Cig-Plug Adapter
Dual Port USB Cig-Plug Adapter USB Port 1 Output: 4.9V ~ 5.25V, 2.4A (12 Watts Max) USB Port 2 Output: (3.6V ~ 6V 3A) (6.2 ~ 9V 2A) (9.2 ~ 12V 1.5A) Quickcharge 3.0 Compatible (18 Watts Max)
SKU: PRO-945010 Mfgr Part#: 945010
|
|
|
ProClip USA
ProClip Printer Mount Kit Zebra ZQ520
Printer Mount Kit with Quick Release Dock for Zebra ZQ520
SKU: PRO-241425 Mfgr Part#: 241425
|
|
|
PROCLIP USA
PROCLIP USA, NCNR, CHARGING CRADLE WITH TILT-SWIVEL AND USB CABLE
SKU: PRO-241816 Mfgr Part#: 241816
|
|
|
PROCLIP USA
PROCLIP USA, NCNR, CHARGING HOLDER WITH TILT-SWIVEL AND CIGARETTE LIGHTER ADAPTER FOR ZEBRA TC26
SKU: PRO-712197 Mfgr Part#: 712197
|
|
|
ProClip USA
ProClip 12V Output Cig Plug
Cigarette Lighter Adapter 12-48V DC Input 12V 3A DC Output 5.5mm Barrel, 2.3mm Pin(+) For Zebra ET5x Cradles and Similar
SKU: PRO-941023 Mfgr Part#: 941023
|
|
|
ProClip USA
10 Inch Desktop Clamp Mount
10 Inch Desktop Clamp Mount
SKU: PRO-202015 Mfgr Part#: 202015
|
|
|
ProClip USA
Power Supply 12-48V Input - 12V Output
Hard-Wired Power Supply 12-48V Input 12V 3A Output (IP1339 charging box with 2-PIn Molex Cable IP811 and 6-Pin Molex 12V Output Cable IP1341)
SKU: PRO-216355 Mfgr Part#: 216355
|
|
|
ProClip USA
COMMERCIAL MOUNT PLATFORM W/10" MOUNT
Commercial Mounting Platform with 10 inch Universal Mount. Fits Dodge, Freightliner and Mercedes Sprinter vans and several other vehicles. Designed to attach in a DIN slot in the dash, so an available or open DIN slot is needed. Notice: Includes 10 inch Mount. Separate screws may be needed to mount a device holder. Strong enough to hold a device in the Tough Sleeve. Recommended for devices that are 4 lbs. or less.
SKU: PRO-241466 Mfgr Part#: 241466
|
|
|
ProClip USA
Charging Cradle w/Cig Lighter Adapter
Charging Cradle with Cigarette Lighter Adapter, Modular Backplate, Zebra TC73 / TC78
SKU: PRO-712310 Mfgr Part#: 712310
|
|
|
ProClip USA
iPad 10.2 (7th Gen), Key Lock, Hard-Wire
CHARGING HOLDER WITH KEY LOCK, TILT SWIVEL HARD WIRED INSTALLATION iPad 10.2 (7th Gen 2019)
SKU: PRO-736168 Mfgr Part#: 736168
|
|
|
ProClip USA
ZEB ET50/55 8.3 FRAME XBACK KEY CHG USB
Charging Cradle for ET5X 8.3, Frame, X-Back, Key Lock, USB, Scanner Window. Fits the Zebra ET5x 8.3" Tablet in the Rugged Frame with the 30-Pin Connector installed. Reinforced Acetal Corner Bumpers. Scan Window - Enables scanning while the tablet is docked. Key Locking. USB 3.0 Port for attaching peripherals. AMPS and VESA 75MM Mounting Holes. Recommended with ProClip standard-duty or heavy-duty forklift mounts.
SKU: PRO-539893 Mfgr Part#: 539893
|
|
|
ProClip USA
MOUNT PLATE VESA 75 100MM INSET
The VESA ProClip adapter plate attaches to any existing 75mm and 100mm VESA mounting system to create a new flat mounting surface to allow the attachment of ProClip specific mounts and other mounts/devices.
SKU: PRO-215659 Mfgr Part#: 215659
|
|
|
PROCLIP USA
PROCLIP USA, NCNR, ZEBRA QLN 420 ZQ630 PRINTER MOUNT PLATE
SKU: PRO-216005 Mfgr Part#: 216005
|
|
|
ProClip USA
AC Wall Power Supply, USB-C PD, USB-A
AC Wall Power Supply Dual USB Ports, 5' (1.5 Meter) USB-C to USB-C Cable (IP1367), USB-C: Power Delivery 5V/9V/12V 18W USB-A: QC 3.0 6V/9V/12V 18W 18 Watts Combined
SKU: PRO-945032 Mfgr Part#: 945032
|
|
|
PROCLIP USA
PROCLIP USA, NCNR, TOUGH SLEEVE WITH HARD-WIRED POWER SUPPLY SAMSUNG GALAXY TAB ACTIVE3 SAMSUNG GALAXY TAB ACTIVE2
SKU: PRO-241758 Mfgr Part#: 241758
|
|
|
ProClip USA
Samsung Xcover Pro 4-Slot Charging Dock
4 Slot Desktop Charging Dock Samsung Xcover Pro SM-G715
SKU: PRO-216127 Mfgr Part#: 216127
|
|
|
ProClip USA
ProClip Small Universal Scanner Holder
Small Universal Scanner Holder Fits up to 3.26 W x 4.88 H x 2.28 D Inches (83x124x58 mm)
SKU: PRO-216239 Mfgr Part#: 216239
|
|
|
ProClip USA
zebra 3600 standard scanner mount
Standard scanner mount for Zebra 3600 series
SKU: PRO-241464 Mfgr Part#: 241464
|
|
|
ProClip USA
10.5 INCH UNIVERSAL CUP HOLDER MOUNT
6.5 Inch Universal Cup Holder Mount Strong construction 360 Degree swivel Fits standard vehicle cup holders AMPS hole pattern for mounting
SKU: PRO-202019 Mfgr Part#: 202019
|
|
|
ProClip USA
UNIVERSAL TABLET HOLDER SMALL
This Small universal ProClip Tablet holder is designed to fit most 7-10 inch tablets without a case. The holder is designed with the intention to leave as much space open to be able to access the charging port and buttons on your tablet. Works with or without case (case can be up to 25mm at its thickest point). Top and bottom arms have padded cushions for added friction to ensure a secure fit. Designed to fit small tablets that are 120 - 150 mm (4.72 - 5.91 inches) in width.
SKU: PRO-511848 Mfgr Part#: 511848
|
|
|
ProClip USA
ProClip Charge Cradle for Zebre ET4x
Charging Cradle with 6-Pin Molex Pigtail for Zebra ET40/ET45 (8" with Rugged Boot)
SKU: PRO-216378 Mfgr Part#: 216378
|
|