|
Description |
Price (USD)
|
Availability
|
|
ProClip USA
NC/NR ZEBRA ET5X 10.1 CHARGE CRADLE, KEY
Charging Cradle with Key Lock and USB Host Port Requires Rugged Frame 30 Pin Connector Supports Expansion Back Scanner Accessible While Docked 5.5mm Barrel Jack Zebra ET50/51/55/56 10.1
SKU: PRO-736266 Mfgr Part#: 736266
|
|
|
ProClip USA
FORKLIFT MOUNT HD 4 INCH ARM
Heavy-Duty Forklift Mount, 4 Inch Arm, 3.375 x 5.125 Inch Clamp. Perfect for use with all types of forklifts. Attach a device holder to the included arm and you are all set to go. - Solid-core aluminum for exceptional strength - The forklift mount can be mounted on square surfaces, perfect for forklift cages
SKU: PRO-215888 Mfgr Part#: 215888
|
|
|
ProClip USA
Hard-Wired Power Supply 12-48V DC Input
Hard-Wired Power Supply 12-48V DC Input 12V 3A DC Output 5.5mm Barrel, 2.3mm Pin(+) For Zebra ET5x Cradles and Similar
SKU: PRO-941024 Mfgr Part#: 941024
|
|
|
ProClip USA
FORKLIFT MOUNT 5" STD DUTY 3.75 x 5.125
Standard Duty Forklift Mount, 5 Inch Arm, 3.75 x 5.125 Inch Clamp. This Mount can angle, tilt, swivel and extend your holder/device for a better viewing position. The mount swivels 360 degrees horizontally and vertically. Extending 5 inches from the base, the face plate has an AMPS hole pattern to accommodate most holders, cradles, and mounts.
SKU: PRO-215980 Mfgr Part#: 215980
|
|
|
ProClip USA
ProClip 1.5" Ball to AMPS Plate
1.5" Ball to AMPS Plate
SKU: PRO-100200 Mfgr Part#: 100200
|
|
|
ProClip USA
FORKLIFT MOUNT HD 6 INCH ARM
Heavy-Duty Forklift Mount, 6 Inch Arm, 3.375 x 5.125 Inch Clamp. Perfect for use with all types of forklifts. Attach a device holder to the included arm and you are all set to go. - Solid-core aluminum for exceptional strength - The forklift mount can be mounted on square surfaces, perfect for forklift cages
SKU: PRO-215889 Mfgr Part#: 215889
|
|
|
ProClip USA
ZEB CRADLE FOR THE L10 XPAD AND XSLATE
This tablet cradle is designed to fit the Zebra L10 tablet in both the XSLate and XPad format. The key lock will slide through the handle of the Xpad version or over the top of the XSlate and provide a secure hold for the device. - This cradle doesn't block the rear facing camera. - The cradle is designed to fit the Zebra xDIM V3 module to add power and USB ports as needed for external accessories such as RFID readers or bar code scanners. - Includes AMPS and VESA 75 mounting hole patterns.
SKU: PRO-216090 Mfgr Part#: 216090
|
|
|
ProClip USA
43" Floor Stand with 10" Flex Arm AMPS
43" Floor Stand with AMPS Plate, Hollow 34" section with cable path (0.6 In / 15mm inner diameter), 10" Flex arm 360 degree flexibility, 12" base plate
SKU: PRO-100197 Mfgr Part#: 100197
|
|
|
ProClip USA
Roll Form Forklift Mount w/HD Pedestal
Roll Formed Pillar Clamp Mount with Heavy Duty Swivel Arm
SKU: PRO-100403 Mfgr Part#: 100403
|
|
|
ProClip USA
Printer Mount Kit Zebra ZD42x ZD62x
Printer Mount Kit Direct Thermal and Thermal Transfer Models Zebra ZD420 ZD421 ZD620 ZD621
SKU: PRO-216366 Mfgr Part#: 216366
|
|
|
ProClip USA
TC70/72/75/77 CHARGE CIGLIGHT
Charging Cradle with Cigarette Lighter Plug. Custom Fit For: Zebra TC70 / TC72 / TC75 / TC77 - Custom fit to your bare device - Includes Tilt-Swivel to angle cradle 15 degrees any direction - Rotate between portrait and landscape view
SKU: PRO-512707 Mfgr Part#: 512707
|
|
|
ProClip USA
AJUSTABLE HOLDER FOR 11-14 mm CASE
Adjustable Phone Holder for Rugged Cases - Device thickness: 11-14 mm (0.43-0.55 inches) - Device thickness: 11-14 mm (0.43-0.55 inches). This Large Adjustable Universal Holder is designed to hold devices used with a rugged case. You make a one time easy adjustment to have the best fit for your device. When you switch cases you can re-adjust the holder for a better fit. Rotate in portrait and landscape view, great for navigation.
SKU: PRO-246850 Mfgr Part#: 246850
|
|
|
ProClip USA
Galaxy Tab A7 Lite Tough Sleeve HARDWIRE
Tough Sleeve, Quick Release Power Dock and Hard-Wired Power Supply Samsung Galaxy Tab A7 Lite 8.7" (2021 SM-T220 SM-T225 SM-T227)
SKU: PRO-241792 Mfgr Part#: 241792
|
|
|
ProClip USA
ProClipUniversal M4 Fastener Pack
Universal Fastener Pack - 4 - M4 x 10, 14 and 20 mm Low Profile 2.5 mm Hex, 4 - M4 Lock Nut, Flat Washer, Lock Washer, 1 - 2.5 Allen Wrench
SKU: PRO-100223 Mfgr Part#: 100223
|
|
|
ProClip USA
FORKLIFT MOUNT 6" STD DUTY 2.75 x 5.126
Standard Duty Forklift Mount, 6 Inch Arm, 2.75 x 5.125 Inch Clamp. This Mount can angle, tilt, swivel and extend your holder/device for a better viewing position. The mount swivels 360 degrees horizontally and vertically. Extending 6 inches from the base, the face plate has an AMPS hole pattern to accommodate most holders, cradles, and mounts.
SKU: PRO-215979 Mfgr Part#: 215979
|
|
|
ProClip USA
NC/NR ZEB TC51/52/56/57W/BOOT CHARGE CIG
Charging Cradle with Cigarette Lighter Plug (for Device with Zebra Rugged Boot). Custom Fit For: Zebra TC51/52/56/57 - Includes Tilt-Swivel to allow holder to angle 15 degrees in any direction - Tilt-swivel also allows for portrait and landscape view - AMPS hole pattern for attachment to any mount
SKU: PRO-512926 Mfgr Part#: 512926
|
|
|
ProClip USA
ET4x Cradle, CLA, Boot
Charging Cradle, Cigarette Lighter Adapter Zebra ET40/ET45 8" (with Rugged Boot)
SKU: PRO-712318 Mfgr Part#: 712318
|
|
|
ProClip USA
2 Inch Pipe Mount Kit
QUICK CLAMP MOUNT WITH QUICK RELEASE DOCK
SKU: PRO-100148 Mfgr Part#: 100148
|
|
|
ProClip USA
ProClip Large Universal Scanner Holder
Large Universal Scanner Holder Fits up to 3.66 W x 5.67 H x 2.28 D Inches (93x144x58 mm)
SKU: PRO-216217 Mfgr Part#: 216217
|
|
|
ProClip USA
FORKLIFT MOUNT 6" STD DUTY 3.75 x 5.126
Standard Duty Forklift Mount, 6 Inch Arm, 3.75 x 5.125 Inch Clamp. This Mount can angle, tilt, swivel and extend your holder/device for a better viewing position. The mount swivels 360 degrees horizontally and vertically. Extending 6 inches from the base, the face plate has an AMPS hole pattern to accommodate most holders, cradles, and mounts.
SKU: PRO-215981 Mfgr Part#: 215981
|
|
|
ProClip USA
MOUNT HD 4 INCH ROUND BASE 90 TWIST
This 4 inch 90 degree twist Mount has teeth within the interlocking joints providing a very strong connection that can withstand a lot of weight. - The mounts come in 2 inch, 4 inch, 6 inch, 8 inch, and 10 inch heights with and AMPS base and top. Mounts can be purchased in complete sets or as individual pieces. - Smaller teeth than our super-duty mounts for more adjustment options - 90 degree twist for more angling options
SKU: PRO-215851 Mfgr Part#: 215851
|
|
|
ProClip USA
4 - M4x12mm Hex Cap Screw with Lock Nuts
M4 x 12mm Hex Cap Screws with Nyloc Nuts (4 pk), Blk. These black cap screws and lock nuts are an effective way to attach any ProClip device holder directly to the base plate of any one of our Standard Duty or Heavy Duty Mounts.
SKU: PRO-215591 Mfgr Part#: 215591
|
|
|
ProClip USA
SUCTION CUP MOUNT 6 INCH
This Mount can angle, tilt, swivel and extend your holder/device for a better viewing position. This mount swivels 360 degrees horizontally and vertically. It extends 6.3 inches/ 160 mm and can be attached to any smooth flat surface. The face plate has an AMPS hole pattern to accommodate most holders, cradles, mounts and car kits. - This item does not come with fasteners.
SKU: PRO-202017 Mfgr Part#: 202017
|
|
|
ProClip USA
UNIVERSAL PEDESTAL 6 INCH
This Mount can angle, tilt, swivel and extend your holder/device for a better viewing position. This mount swivels 360 degrees horizontally and vertically. It extends 6.5 inches/ 165 mm and can be attached to any flat surface. The face plate has an AMPS hole pattern to accommodate most holders, cradles, mounts and car kits. - This item does not come with fasteners.
SKU: PRO-202010 Mfgr Part#: 202010
|
|
|
ProClip USA
Quick Release Dock W/ 15 mm Release TaB
The ProClip Quick Release Dock works with any ProClip device holder with a Tilt-Swivel. Easily remove a holder from its mounting location without the use of tools. - 15 mm Extended release tab for easy device removal - Allows you to switch device holders without changing the mount - Fits all ProClip Device Holders with Tilt-Swivel or male adapter block
SKU: PRO-215699 Mfgr Part#: 215699
|
|
|
ProClip USA
FORKLIFT MOUNT 5" STD DUTY 2.75 x 5.125
Standard Duty Forklift Mount, 5 Inch Arm, 2.75 x 5.125 Inch Clamp. This Mount can angle, tilt, swivel and extend your holder/device for a better viewing position. The mount swivels 360 degrees horizontally and vertically. Extending 5 inches from the base, the face plate has an AMPS hole pattern to accommodate most holders, cradles, and mounts.
SKU: PRO-215978 Mfgr Part#: 215978
|
|
|
ProClip USA
SM-T307 Tough Sleeve KeyLock USB CigPlug
TOUGH SLEEVE, QUICK RELEASE POWER DOCK , KEY LOCK AND USB CIGARETTE LIGHTER ADAPTER SAMSUNG GALAXY TAB A 8.4(2020 SM-T307)
SKU: PRO-241685 Mfgr Part#: 241685
|
|
|
ProClip USA
Heavy Duty Swivel Mount M5 Round Bases
Heavy Duty Swivel Mount - Round Bases, #1 Heavy Duty Pedestal Teeth, #2 Heavy Duty Pedestal Teeth, 5MM Slots (Fits M5 Fasteners)
SKU: PRO-216161 Mfgr Part#: 216161
|
|
|
ProClip USA
Charge Cradle, USB-A Host, Zebra ET4x
Charging Cradle with USB-A Host for Zebra ET40/ET45 (8" with Rugged Boot)
SKU: PRO-216379 Mfgr Part#: 216379
|
|
|
ProClip USA
NC/NR PRINTER MOUNT KIT; ZEBRA QLN420 /
Custom Fit For: Zebra QLN 420 / Zebra ZQ630. Includes quick release dock for easy removal from mounting surface. Pre-drilled holes for AMPS hole patterns
SKU: PRO-216004 Mfgr Part#: 216004
|
|