|
Home >
Data Networking > Controllers
|
|
|
Showing: 31 - 60 of 107 Items
|
Total Page(s): 4
|
1
2
3
4
|
|
Description |
Price (USD)
|
Availability
|
|
Adtran
MX2800 Chassis
Adtran M13/STS-1 Multiplexer - T1/E1 , 1 x 10/100Base-T Network, 1 x Dial - 44.736Mbps T3
UPC: 0607565000799
SKU: ADN-1200290L1 Mfgr Part#: 1200290L1
|
|
|
Adtran
OPTI-6100 SCM IEEE 1613
The OPTI-6100 SCM IEEE 1613 has been tested to IEEE 1613 standards and is suitable for applications in electric power substations. The basic functionality and performance remains the same as the basic NEBS-compliant OPTI-6100 utilized in carrier applications. Customers should be aware that 1613 compliance is, in most cases, mutually exclusive with Telcordia NEBS Level 3 testing, therefore, modules are either NEBS- or 1613-compliant, but not both, on the same modules. Care should be taken to order the correct module.
UPC: 0607565027659
SKU: ADN-1184500L1E Mfgr Part#: 1184500L1E
|
|
|
Adtran
XFP 11.3G 1310NM 10KM
XFP 11.3G 1310NM 10KM
UPC: 0607565037962
SKU: ADN-1442911F1 Mfgr Part#: 1442911F1
|
|
|
Adtran
OPTI-6100 DS1VME2
OPTI-6100 28 port DS1 VT mapped tributary module, enhanced
UPC: 0607565030079
SKU: ADN-1184515E5 Mfgr Part#: 1184515E5
|
|
|
Adtran
SFP+ 11.3G 1330TX-1270RX 20KM
The SFP+ 11.3G 1330TX-1270RX 20KM is an Small Form Factor Pluggable Plus (SFP+) that operates on a single fiber, using separate wavelengths for transmit and receive. It uses LC fiber connectors and has a maximum range of 20km. The optic supports data rates up to 11.3G.
UPC: 0607565039980
SKU: ADN-1442422F1 Mfgr Part#: 1442422F1
|
|
|
Adtran
OPTI-6100 SCM3
The SCM3 is an advanced controller module for the OPTI-6100 system. It is functionally equivalent to the SCM2, and adds RoHS compliance.
SKU: ADN-1184500F3 Mfgr Part#: 1184500F3
|
|
|
Adtran
SFP+ 11.3G 1270TX-1330RX 20KM
The SFP+ 11.3G 1270TX-1330RX 20KM is an Small Form Factor Pluggable Plus (SFP+) that operates on a single fiber, using separate wavelengths for transmit and receive. It uses LC fiber connectors and has a maximum range of 20km. The optic supports data rates up to 11.3G.
UPC: 0607565039973
SKU: ADN-1442422F2 Mfgr Part#: 1442422F2
|
|
|
Adtran
SFP GPON OLT 2.5G 1.25G D
SFP GPON OLT 2.5G 1.25G D
SKU: ADT-1442542F1C Mfgr Part#: 1442542F1C
|
|
|
Adtran
OPTI-6100 3-PORT DS3 MID- SPEED MODULE
OPTI-6100 Three-port DS3 mid-speed module with framers. Allows for DS3 or EC-1 mid-speed services to be dropped via BNC connectors on the rear of the OPTI-6100 chassis. Maximum of four 1:1 protected (8 cards) per system. This card is required to drop more than four DS3s from a chassis.
UPC: 0607565024559
SKU: ADN-1184533L3 Mfgr Part#: 1184533L3
|
|
|
Cisco
Cisco Embedded Wireless Controller on C9
Cisco Catalyst C9115I Dual Band 802.11ax 5.38 Gbit/s Wireless Access Point - Indoor - 2.40 GHz, 5 GHz - Internal - MIMO Technology - 1 x Network (RJ-45) - 2.5 Gigabit Ethernet - Bluetooth 5
UPC: 0889728267144
SKU: CSC-C9115AXIEWCA Mfgr Part#: C9115AXI-EWC-A
|
|
|
Adtran
SFP+ 11.3G 1270TX-1330RX 40KM
The SFP+ 11.3G 1270TX-1330RX 40KM is an Small Form Factor Pluggable Plus (SFP+) that operates on a single fiber, using separate wavelengths for transmit and receive. It uses LC fiber connectors and has a maximum range of 40km. The optic supports data rates up to 11.3G.
UPC: 0607565040009
SKU: ADN-1442442F2 Mfgr Part#: 1442442F2
|
|
|
Adtran
SFP+ 11.3G 1330TX-1270RX 40KM
The SFP+ 11.3G 1330TX-1270RX 40KM is an Small Form Factor Pluggable Plus (SFP+) that operates on a single fiber, using separate wavelengths for transmit and receive. It uses LC fiber connectors and has a maximum range of 40km. The optic supports data rates up to 11.3G.
UPC: 0607565039997
SKU: ADN-1442442F1 Mfgr Part#: 1442442F1
|
|
|
Adtran
OPTI-6100 MX CHASSIS E
Adtran OPTI-6100 MX Chassis - 15
UPC: 0984537721143
SKU: ADN-1184501G1 Mfgr Part#: 1184501G1
|
|
|
Adtran
OPTI-6100 MX CHAS IEEE 1613
Adtran OPTI-6100 MX Chassis - 15
UPC: 0607565027512
SKU: ADN-1184501G1E Mfgr Part#: 1184501G1E
|
|
|
Cisco
802.11ac Ctrlr AP 4x4:3SS w/CleanAir TAA
802.11ac Ctrlr AP 4x4:3SS w/CleanAir TAA
SKU: CSC-AIRCAP3702IBK9TA Mfgr Part#: AIR-CAP3702I-B-K9 TAA
|
|
|
Adtran
OPTI-6100 TRAM3E
The TRAM3E provides 3 DS3 interfaces and offers STS connectivity as an option (in addition to DS3)
SKU: ADN-1184532G3 Mfgr Part#: 1184532G3
|
|
|
Adtran
OPTI-6100 3 DS3 TRANSMUX
Three port tributary module for the OPTI-6100. Converts M13 mapped DS3 to VT1.5 STS-1 payload. Second card added for 1:1 redundant operation. Maximum of eight cards per shelf (4 working, 4 protect).
UPC: 0607565018206
SKU: ADN-1184532L1 Mfgr Part#: 1184532L1
|
|
|
Adtran
OPTI-6100 TRAM3 IEEE 1613
The OPTI-6100 TRAM3 IEEE 1613 has been tested to IEEE 1613 standards and is suitable for applications in electric power substations. The basic functionality and performance remains the same as the basic NEBS-compliant OPTI-6100 utilized in carrier applications. Customers should be aware that 1613 compliance is, in most cases, mutually exclusive with Telcordia NEBS Level 3 testing, therefore, modules are either NEBS- or 1613-compliant, but not both, on the same modules. Care should be taken to order the correct module.
SKU: ADN-1184532L1E Mfgr Part#: 1184532L1E
|
|
|
Adtran
OPTI-6100 DS10TSIM IEEE 1613
The OPTI?6100 DS1/DSO Time Slot Interchange Multiplexer IEEE 1613 Service Module (DS10TSIM) cross?connects up to 2016 DS0s between channels contained in up to 84 DS1 circuits Two may be utilized if redundancy is required.
SKU: ADN-1184570G1E Mfgr Part#: 1184570G1E
|
|
|
Adtran
SFP+ COMBO OLT D2 IND
SFP+ COMBO OLT D2 IND
SKU: ADT-1442543F2 Mfgr Part#: 1442543F2
|
|
|
Adtran
OPTI-6100 DS1VM2 IEEE 1613
The OPTI-6100 DS1VM2 IEEE 1613 has been tested to IEEE 1613 standards and is suitable for applications in electric power substations. The basic functionality and performance remains the same as the basic NEBS-compliant OPTI-6100 utilized in carrier applications. Customers should be aware that 1613 compliance is, in most cases, mutually exclusive with Telcordia NEBS Level 3 testing, therefore, modules are either NEBS- or 1613-compliant, but not both, on the same modules. Care should be taken to order the correct module.
UPC: 0607565027567
SKU: ADN-1184515L4E Mfgr Part#: 1184515L4E
|
|
|
Adtran
MX2800 DS3 DC NON-REDUNDANT W/OUT MODEM
MX2800 M13 Multiplexer. Same as 4205290L3 w/out the built-in modem. Unit consist of one Chassis (1200290L1), one Controller Card (1205288L2) and one DC Power Supply (1202289L2).
SKU: ADN-4205290L7 Mfgr Part#: 4205290L7
|
|
|
Adtran
OPTI-6100 DS1CEM
OPTI-6100 circuit emulation module. It supports pseudowire encapsulation of up to 84 DS1s into a GigE interface. Two units may be equipped for optional redundancy. SFPs for the optical interface are sold separately.
UPC: 0607565029493
SKU: ADN-1184535G3 Mfgr Part#: 1184535G3
|
|
|
Adtran
SFP+ XGS OLT 1577/1270nm N2 IN
SFP+ XGS OLT 1577/1270nm N2 IN
SKU: ADT-1442544F2 Mfgr Part#: 1442544F2
|
|
|
Adtran
OPTI-6100 MX OMM48 FAN PACKAGE
OC-48 Fan Package consists of the following components: 1184501L1 MX Chassis (1), 1184537L1 HFANM Fan Kit (1), 1184538L1 Heat Baffle (1), 1184553L1 HFANM Air Filter (1), and 1184541L1 Fiber Routing Tray (1).
SKU: ADN-4184548L1 Mfgr Part#: 4184548L1
|
|
|
Adtran
OPTI-6100 ETHM8EWS
OPTI-6100 Ethernet over SONET module, ETHMEWS. Provides 2 GigE and 610/100 ports, and requires two slots in an OPTI-6100 SMX, MX, or LMX chassis. Two are equipped for optional equipment protection.
UPC: 0607565030154
SKU: ADN-1184530G3 Mfgr Part#: 1184530G3
|
|
|
Adtran
MX2800 DS3 DC REDUNDANT W/OUTMODEM
Adtran MX2800 - DC Redundant - Coaxial, Twisted Pair - Ethernet - 44.73 Mbit/s - 2 x BNC - 1 x RJ-45
UPC: 0737069003030
SKU: ADN-4205290L8 Mfgr Part#: 4205290L8
|
|
|
Adtran
MX2800 DS3 DC P2/C2/F
M13 Multiplexer. Same as 4205290L14 w/out the built-in modem. Unit consist of one Chassis (1200290L1), two Controller Cards (1205288L2), two DC Power Supplies (1202289L2) and one faceplate fan (1200466L1). Fan allows up to 42 units to be stacked in a 7-foot bay.
SKU: ADN-4205290L18 Mfgr Part#: 4205290L18
|
|
|
Adtran
MX2800 DS3 AC/DC RD SYS W/O MD
A fully redundant M13 mux that is AC/DC powered. Complete w/ redundant controller cards and 1 DC power supply and 1 AC power supply. Unit is 19" or 23" rack mountable and ships w/ one 8-pin to 8-pin modular cable, one modular to DB-9 female adapter. Unit consist of 1 Chassis (1200290L1), 2 Controller Cards (1205288L2),1 DC Power Supply (1202289L2 ) and 1 AC Power Supply (1202289L1). It also includes the AC/DC Power Charger (1175043L3), power alarm cable (1200657L2).
SKU: ADN-4205290L9 Mfgr Part#: 4205290L9
|
|
|
Adtran
MX2800 DS3 AC P2/C2/F
M13 Multiplexer. Unit consist of one Chassis (1200290L1), two Controller Cards (1205288L2), two AC Power Supplies (1202289L1) and one fan faceplate (1200466L1). Fan allows up to 42 units to be stacked in a 7-foot bay.
SKU: ADN-4205290L16 Mfgr Part#: 4205290L16
|
|
|
|
1
2
3
4
|
Showing: 31 - 60 of 107 Items
|
Total Page(s): 4
|
Home >
Data Networking > Controllers
|
Office Computers, All-in-One Terminals, Touch Screen Computers Desktop, Office Systems
|
|